Contact Us | Home
Search:
Home Company Profile Product List News Technical knowledge Case Product Video Contact us
Product Category
 KGPS Thyristor Medium Frequency Power Source
 Medium Frequency Bending Machine
 Quenching Converter
 Anticorrosive Pipe
 Electric Furnace
 Coil
 Capacitor
 Circuit board
 Medium Frequency Elbow Machine
 Medium Frequency Pipe Expanding Machine
 Cutting Machine
 Nonstandard pipe
 
Technical knowledge Location: Home >>Technical knowledge
 
Tee knowledge

    A tee is the most common pipe fitting. It is available with all female thread sockets, all solvent weld

sockets,or with opposed solvent weld sockets and a side outlet with female threads. It is used to either

combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90° to the

connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes

of different diameters or for changing the direction of pipe runs. They are made of various materials and

available in various sizes and finishes. They are extensively used in pipeline networks to transport

two-phase fluid mixtures. They are categorized as:


Equal
Unequal


     When the size of the branch is same as header pipes, equal tee is used and when the branch size is

less than that of header size, reduced tee will be used. Most common are tees with the same inlet and

outlet sizes. Some of the industrial tees are Straight Tee, Reducing Tee, Double Branch Tee, Double

Branch Reducing Tee, Conical Tee, Double Branch Conical Tee, Bullhead Tee, Conical Reducing Tee,

Double Branch Conical Reducing Tee, Tangential Tee, and Double Branch Tangential Tee.

    The above tees are categorized on the basis of their shapes and structure. They can also be classified

on the basis of the application they are required to perform.[further explanation needed

    The three outlet sizes should be named in order (e.g. left, middle, right; measuring 15-22-15).[further

explanation needed]The three sizes of a tee are end x end x center. So if you want a tee that is 1" on both

ends and 3/4" in the center it would be 1" x 1" x 3/4".

 

Home | Contact Us | Attentive service | Case Copyright©2008-2011 Shean (Cangzhou) All Rights Reserved